Pipe Pile Requirements
| A252 Gr 2 |
A252 Gr 3 |
A53 A |
A53 B |
A500 B |
A500 C |
|
| Yield (Min.) | 35,000 | 45,000 | 30,000 | 35,000 | 42,000 | 46,000 |
| Tensile (Min.) | 60,000 | 66,000 | 48,000 | 60,000 | 58,000 | 62,000 |
| NDT Test | No | No | Yes | No | No | |
| Dia. Tolerance | +/-1% | +/-1% | +/-1% | +/- .75% | +/- .75% | |
| Wall Thickness | -12.5% | -12.5% | -12.5% | +/- 10% | +/- 10% | |
| Weight Tolerance | +15% | +15% | +/- 10% | NA | NA | |
| -5% | -5% | |||||
| Chemical Elements | 1 | 1 | 9 | 4 | 4 | |
| Seam Annealed | No | No | Yes | No | No | |
| NOTE: | A) All pipe pile welds are 100% seam annealed B) All pipe pile welds are 100% ultrasonic inspected C) All chemical elements are reported D) Machine beveled or square ends E) Custom lengths up to 70' |
|||||